CHOOSING BABYLISSPRO® ENSURES YOU WILL HAVE HIGH QUALITY PROFESSIONAL TRIMMERS & CLIPPERS ADAPTED AND DESIGNED FOR INTENSIVE DAILY USE BY HAIRSTYLISTS. REGULAR MAINTENANCE IS ESSENTIAL (REGULAR CLEANING, BRUSHING AND OILING) TO ENSURE OPTIMAL PERFORMANCE AND TO GUARANTEE A MAXIMUM SERVICE LIFE. 90% OF THE RETURNS TO OUR AFTER- SALES SERVICE ARE CONNECTED TO A LACK OF MAINTENANCE. A FEW PRACTICAL TIPS COULD HELP YOU QUICKLY RESOLVE THE PROBLEM YOURSELF BEFORE YOU TAKE THE STEPS TO RETURN THE UNIT TO THE AFTER- SALES SERVICE. MAINTENANCE FAILURE TO MAINTAIN THE BLADE: There is a very good chance that it will now work properly! The trimmers will cut poorly or start to make an abnormal, unpleasant sound when running and the noise level is ABNORMAL DRAINAGE OF THE BATTERY much greater than normal. The trimmer battery drains too quickly or abnormally Without regular cleaning, hair and residue will build up inside the cutting head and prevent the unit from working WHAT TO DO IF THIS HAPPENS: properly. 1. Failure to lubricate the blades will cause the trimmer to use too much energy which will result in the battery being drained sooner or more quickly. WHAT TO DO IF THIS HAPPENS: You should thus lubricate the blades and test the unit 1. Make sure that the trimmers are turned off before again. removing the blade. Set the cutting length to the 2. It is very important to make sure that the unit’s initial appropriate position according to the type of trimmer charge is fully completed, the time is indicated in the user’s (position specified in the user manual for the unit) before manual for each model. removing the blade. 2. Holding the trimmer facing up, push the blade away #ILOVEMYCLIPPER from the handle with your thumb and catch it in your other hand. 3. Carefully brush the trimmer and the blade to remove any hair or stubble. 4. Remove the blade and brush any hair and stubble from the side of the trimmer head. 5. Brush any hair and stubble between the fixed blade and the moving blade while pressing the cleaning lever to lift the moving blade. 6. Spray some Spray FX4in1 into the space between the teeth of the fixed and the moving blades. 7. To reattach theblade to the trimmer head, slide the tab of the blade into the notch intended for this purpose and push down until you hear a click indicating that the blade is firmly in place. 8. Switch the trimmer on. GNIMOORG / EPUOC