OPENING AND ADJUSTMENT OF THE HOOD
Place the hood dryer on a table before opening it. Facing the front of the dryer, release the front hood latch by bending the latch slightly toward you. Lift the hood and stem up and forward by the handle until the stem is in the maximum forward position. Then tilt the hood back slightly until it snaps into place under the hood lock. Height adjustment: tilt the hood and stem right back and lift the extendable neck to adjust height. Once satisfied that the extendable neck is the correct height, carefully allow the hood and stem to tilt forward to maintain height adjustment.
Prepare the hair for drying e.g. in rollers, lightly towel dried, etc. Ensure that the power switch is in «off» position and plug in. Switch to either I (low) or II (high). Use position II for thick or long hair or for starting the drying process, and position I for normal drying or for perfectly safe drying of damaged hair or synthetic hair extensions. As a general rule, it is recommended to start in position II and end drying in position I. Adjust the vents so that there is more or less air on the top, front or back of the head, as your hairstyle requires. Rotating the handle to left or right opens or closes vents that affect the distribution of air flow inside the hood.